From: Heidi Dixon-White <dixonwhiteh**At_Symbol_Here**ABCLABS.COM>
Subject: [DCHAS-L] Haz Waste Transfer
Date: Thu, 26 Jun 2014 19:18:47 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 92DD99A7239BBD4CAE538C2EFDDE3BCC8924D117**At_Symbol_Here**pExchange.abclabs.com


We routinely collect liquid hazardous waste in 5-gall containers in our laboratories.  This waste stream primarily consists of flammable solvents and water.  Full containers are moved to our bulk haz waste accumulation room and transferred to 55 gall drums.  The 5-gall containers are very heavy so lifting/pouring can easily lead to spills.  We have found that hand pumps also tend to be messy.  Does anyone use a mechanical pump (intrinsically safe, possibly air driven, or other) to manage this type of transfer? 

 

 



Heidi Dixon-White
Chemical Hygiene Officer & Safety Coordinator
dixonwhiteh**At_Symbol_Here**abclabs.com
www.abclabs.com
573.777.6146
317.796.4282
              


This message including any attachments may contain trade secrets and other confidential information and may be disclosed or used only by the intended recipient(s). If you have received this message in error, please delete it and notify the sender immediately. Unless you are the intended recipient, you are not authorized to and should not read, retain, copy, or disseminate this message.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.