We run into this issue regularly with very small micro tubes at -80 being a large part of our business. I've found that the fabric gloves with the dipped palm and fingers give employees a medium of dexterity and insulation. Not a perfect solution but better than thin nitrile or bulky cryogenic gloves. A glove that insulates well and retains dexterity is a market niche that cries to filled.
Tim
Timothy M. Hauser, CHMM
Manager, Environmental, Health & Safety
Promega Corporation
2800 Woods Hollow Road, Madison WI 53711 USA
Timothy.Hauser**At_Symbol_Here**promega.com | Direct (608) 298-4807 | Cell: (262) 844-1665 | Fax: (608) 277-2677
-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ralph B. Stuart
Sent: Friday, February 21, 2014 1:32 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Gloves for -80 freezer work?
A lab tech here asks this question:
I am looking for recommendations for gloves to use while organizing -80 freezers. I do have cryogenic gloves, but I am looking for something that allows for better dexterity.
I wonder if anyone has dealt with this issue?
Thanks for any help with this.
- Ralph
Ralph Stuart, CIH
Chemical Hygiene Officer
Cornell University
rstuart**At_Symbol_Here**cornell.edu
Previous post | Top of Page | Next post