| About This Archive | | DCHAS-L 2013 Index | | DCHAS-L Yearly Index | |
Check out Safety Emporium for your N95, N99, and face shield needs.
|
Previous by Date: Subject: Re: [DCHAS-L] Flammable cabinet storage best practices Date: Thu, 5 Dec 2013 23:40:23 +0000 Author: Debbie M. Decker |
Next by Date: Subject: Re: [DCHAS-L] Flammable cabinet storage best practices Date: Fri, 6 Dec 2013 12:17:10 +0000 Author: "Funck, Steven" |
On our campus we vent cabinets to the fume hood exhaust system whenever practical to cut down on the exposure when opening them
Russell Vernon, Ph.D.
Director
Environmental Health & Safety
University of California Riverside
900 University Ave
EH&S
Riverside, CA 92521
www.ehs.ucr.edu
russell.vernon**At_Symbol_Here**ucr.edu
direct 951.827.5119
admin 951.827.5528
fax 951.827.5122
Trip Location Intellegence for Planning:
https://ermsp.ucop.edu/uctrip and enter your UCnet ID
________________________________________
From: DCHAS-L Discussion List [dchas-l**At_Symbol_Here**MED.CORNELL.EDU] on behalf of Debbie M. Decker [dmdecker**At_Symbol_Here**UCDAVIS.EDU]
Sent: Thursday, December 05, 2013 3:40 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Flammable cabinet storage best practices
Go here and access our guidance on vented flammable liquid storage cabinets: http://safetyservices.ucdavis.edu/ps/fp/fn/biefs/ventingFlammableStorageCabinets.pdf/view
Also, in the context of Fire Code compliance audits, our designated campus fire marshal offers this guidance:
"According to NFPA 30, Flammable and Combustible Liquids Code Handbook, venting a flammable storage cabinet is not necessary for fire protection purposes.
Flammable and combustible liquid storage cabinets are designed to protect the internal contents from a fire outside the cabinet. An improperly vented cabinet could compromise the ability of the cabinet to protect its contents from a fire.
According to NFPA 30, 6.3.4, "The cabinet is not required to be vented for fire protection purposes. However, the following shall apply:
(a) If vented for whatever reasons, the cabinet shall be vented outdoors or to the fume hood exhaust duct in such a manner that will not compromise the specific performance of the cabinet.
(b) If the cabinet is not vented, the vent openings shall be sealed with the bungs supplied or with bungs specified by the manufacturer."
If vapor or odor is an issue there is a product called VAP-R GARD. That can be attached to the inside of the cabinet I have attached the link.
http://www.grainger.com/Grainger/VAPR-GARD-Vapor-Adsorbent-Cartridge-3NPJ2?cm_sp=IO-_-Home-_-MPC&cm_vc=HPPVZ3"
Hope this helps -
Debbie M. Decker, CCHO
Safety Manager
Department of Chemistry
University of California, Davis
122 Chemistry
1 Shields Ave.
Davis, CA 95616
(530)754-7964
(530)304-6728
dmdecker**At_Symbol_Here**ucdavis.edu
Birkett's hypothesis: "Any chemical reaction
that proceeds smoothly under normal conditions,
can proceed violently in the presence of an idiot."
-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ralph B. Stuart
Sent: Thursday, December 05, 2013 12:22 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Flammable cabinet storage best practices
A discussion today about proper venting of flammable storage cabinets led to the question of what is the best approach to managing chemical storage in the cabinet to control accumulating fugitive odors. I wonder if anyone has written guidance for a Chemistry Dept audience for that addresses this question?
Thanks for any help with this.
- Ralph
Ralph Stuart CIH
Chemical Hygiene Officer
Department of Environmental Health and Safety Cornell University
rstuart**At_Symbol_Here**cornell.edu
Previous post | Top of Page | Next post