From: "Olinger, Patricia L" <patty.olinger**At_Symbol_Here**EMORY.EDU>
Subject: Re: [DCHAS-L] laminar flow hood purchase
Date: Thu, 7 Nov 2013 17:13:00 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: F7700FBD6385EE44AD95343829AF74C1AC83B99A**At_Symbol_Here**e14mbx11n.Enterprise.emory.net
In-Reply-To <0CF53C56-7F62-4BBD-9486-854DCFA2A144**At_Symbol_Here**yahoo.com>


Hi Shelly,

Do know what they want it for? Depending on what they are wanting it for would potentially determine what would be recommended.

For example, if it were for potent compound handing/weighing I would look into a FlowSciences powders weighing cabinet. Again, it really depends on what they need the hood for.

Thank you,

Patty

Patty Olinger, RBP
Director, Environmental, Health, and Safety Office
Emory University
1762 Clifton Rd.
Atlanta, GA 30322
404-727-5690 office
404-727-9778 fax
www.ehso.emory.edu
________________________________________
From: DCHAS-L Discussion List [dchas-l**At_Symbol_Here**MED.CORNELL.EDU] on behalf of Mark Lee [mleesafety**At_Symbol_Here**YAHOO.COM]
Sent: Thursday, November 07, 2013 11:33 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] laminar flow hood purchase

Shelly,

From what I have seen, the Laminar Flow Hoods are one of the best on the market. Performing Lockout/Tagout audits, I see a lot of the bench top vertical models. Here is a link for your viewing.

www.laboratory-supply.net/laminarflowhoods/shop_vertical_laminar_flow_hood_4feet.html?gclid=CI2kq_eL07oCFTJp7Aodsz4AAA

I hope this helps you out.

Respectfully,

Mark C. Lee
Safety Manager Specialist
Lockout/Tagout Specialist


> On Nov 7, 2013, at 10:11 AM, "Bradley, Shelly" wrote:
>
> One of my faculty is interested in a laminar flow hood. I know nothing about them.
> What do I need to know?
> Are the self-contained ones any good?
> Which brands are best?
>
> Thanks for your help!!
>
> Shelly Bradley
> NRCC-CHO
> Authorized OSHA Trainer
> Instrumentation Specialist
> Laboratory Development Assistant
> Campus Chemical Compliance Director
> Department of Chemistry
> Hendrix College
> Conway, AR 72032
> Ph: (501) 450-3812
> Fax: (501) 450-3829
> bradley**At_Symbol_Here**hendrix.edu

________________________________

This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.