From: Kim Gates <kim.gates**At_Symbol_Here**STONYBROOK.EDU>
Subject: [DCHAS-L] Fume Hood & Lab ventilation presentation for Engineering students - what would you include?
Date: Thu, 10 Oct 2013 15:01:35 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAA4EBLtr-2Lp5CQ3oxhBF+7F4_sXvOk9vR=RHgjV4YnmmF775w**At_Symbol_Here**mail.gmail.com


I have the opportunity to give a 1 hr presentation to the Engineering student section of ASHRAE that meets on our campus. I am going to talk about fume hoods & lab ventilation. I will give a short presentation and then take them to a lab so they can test face velocity with my various Alnors.

I'm planning on including ASHRAE Industrial Ventilation, ANSI/AIHA Z9.5, SEFA-1, NFPA 45, Laboratory Fume Hoods by G. Thomas Saunders, and Laboratory Ventilation Work Book by D. Jeff Burton as resources.

As a chemical safety professional, what do you wish the graduating Engineering students knew about fume hoods and lab ventilation?

Thanks, as usual, for your input!

Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
Kim.Gates**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.