From: Ben Ruekberg <bruekberg**At_Symbol_Here**chm.uri.edu>
Subject: Re: [DCHAS-L] Locking out laboratory natural gas fixtures
Date: Wed, 18 Sep 2013 11:46:14 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 00de01ceb486$34ed7e40$9ec87ac0$**At_Symbol_Here**chm.uri.edu
In-Reply-To


If I may suggest, should a whole-room cut-off valve is used; before turning it on, make sure that all of the individual gas valves are turned off.  Inveterate valve- twiddlers can leave the valves on and these will go undetected until the main valve is turned on.

 

Thank you,

 

Ben

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Wagoner, Jo
Sent: Wednesday, September 18, 2013 11:19 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Locking out laboratory natural gas fixtures

 

We have a shut off switch (on button and off button) to the gas line as it comes into the room.  It has been a wonderful solution to random playing with the valves that would cause safety problems.  -Jo, Butler University, Chemistry


On 9/17/13 7:32 PM, "Kennedy, Sheila" <s1kennedy**At_Symbol_Here**UCSD.EDU> wrote:

Remove the handles?
Sheila
_________________________________
Sheila Kennedy, C.H.O.
Safety Coordinator | Teaching Laboratories
UCSD Chemistry & Biochemistry |MC 0303
s1kennedy**At_Symbol_Here**ucsd.edu <mailto:s1kennedy**At_Symbol_Here**ucsd.edu>  | http://www-chem.ucsd.edu <http://www-chem.ucsd.edu/>
Office: (858) 534-0221 | Fax: (858) 534-7687
_________________________________


From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of ILPI Support
Sent: Tuesday, September 17, 2013 1:13 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Locking out laboratory natural gas fixtures

I have a client looking to lock out some existing deck-mounted laboratory natural gas fixtures such as these ones my company sells: http://www.safetyemporium.com/?L4200-131WSA



He said the spec calls for some sort of device that locks on to the hose barb.  But the manufacturer of the valve doesn't have anything like that.  We have some other type of lockout devices that might work on the handle portion, but before I recommend he start trying those out I thought I would consult the collective wisdom of the list first.



So, has anyone ever locked out their gas valves and how did you do it?  Obviously, one can lock out the gas line master shut-off, but they are apparently looking to have individual ones.



Thanks.



Rob Toreki
 

 ======================================================

Safety Emporium - Lab & Safety Supplies featuring brand names

you know and trust.  Visit us at http://www.SafetyEmporium.com <http://www.safetyemporium.com/>

esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412

Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012



 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.