From: Mark Pichaj <mark.pichaj**At_Symbol_Here**BIOLA.EDU>
Subject: Re: [DCHAS-L] Locking out laboratory natural gas fixtures
Date: Wed, 18 Sep 2013 06:55:53 -0700
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAJAyMB+jYkDnn=popnY+ORL9PbexTNiAmWhYq8-RCtCoEtpdwA**At_Symbol_Here**mail.gmail.com
In-Reply-To <641457202.1206439.1379472707154.JavaMail.root**At_Symbol_Here**ganesh.brynmawr.edu>


I've seen the plugs, both male (with a regular wrench or even pliers) and female (with the Allen key). We also have a shut-off switch which shuts off the flow of gas to the whole lab.


yours,
Mark


Mark Adolf Pichaj =95 Assistant Professor =95 Department of Chemistry, Physics & Engineering =95 Bradley 2 =95 x4866
-----------------------------------------------------------------------------------------------------------------------
BIOLA UNIVERSITY =95 13800 Biola Avenue =95 La Mirada, Calif. 90639 =95 562-903-4866 =95 mark.pichaj**At_Symbol_Here**biola.edu



On Tue, Sep 17, 2013 at 7:51 PM, Don Abramowitz <dabramow**At_Symbol_Here**brynmawr.edu> wrote:
Since the serrated barb fitting is a 3/8" NPT connection to the valve, it could be replaced with a 3/8" NPT plug, such as this one:
http://www.automationdirect.com/adc/Shopping/Catalog/Pneumatic_Components/Pneumatic_Fittings_-a-_Air_Couplings/Threaded_Fittings/Brass_Recessed_Hex_Plug/BFRHP-38N?utm_source=google&utm_medium=product-search&gclid=CMaDqZj107kCFU-Z4Aod3SQAKg

Relatively tamper resistant and discreet. Just have to keep track of the allen wrench!

Don

Donald Abramowitz, CIH
Environmental Health & Safety Officer
Bryn Mawr College
Bryn Mawr, PA



I have a client looking to lock out some existing deck-mounted laboratory natural gas fixtures such as these ones my company sells: http://www.safetyemporium.com/?L4200-131WSA

He said the spec calls for some sort of device that locks on to the hose barb. But the manufacturer of the valve doesn't have anything like that. We have some other type of lockout devices that might work on the handle portion, but before I recommend he start trying those out I thought I would consult the collective wisdom of the list first.

So, has anyone ever locked out their gas valves and how did you do it? Obviously, one can lock out the gas line master shut-off, but they are apparently looking to have individual ones.

Thanks.

Rob Toreki

======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust. Visit us at http://www.SafetyEmporium.com
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012




Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.