From: Ralph B. Stuart <rstuart**At_Symbol_Here**CORNELL.EDU>
Subject: [DCHAS-L] Lab Plumbing question
Date: Tue, 27 Aug 2013 12:05:46 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 5564F9EDC11C09468EE5DAF02B5CB30F4A853E19**At_Symbol_Here**BY2PRD0410MB376.namprd04.prod.outlook.com


A friend writes:
"We received a call from a Healthcare setting whose plumber was removing a cast iron waste line trap from their chemistry lab and it "exploded". No flash, but a boom and the line broke apart. Evidently reagents from tests had been poured down that line and it was dry at the time.

"He is sending me the MSDS' but he has identified Sodium Azide as potential culprit.

"Have you run into this and/or come up with a way to evaluate the lines for hazards and/or flush the material out of the lines? The FDA has a good fact sheet regarding how to avoid the problem, but not much about what to do if you already have the problem."

I wonder if anyone knows of a field test to determine whether plumbing has metal azide contamination?

- Ralph


Ralph Stuart CIH
Chemical Hygiene Officer
Department of Environmental Health and Safety
Cornell University

rstuart**At_Symbol_Here**cornell.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.