For evacuation routes maps, best practice is:
The map should be easily visible in areas where employees or visitors are
present. The map should be color coded and contain the following key
elements:
- Primary Exit
- Secondary Exit
- Assembly Area
- Your current location
- Other elements, such as the location of fire extinguisher, first aid kit,
etc.
For exits:
-Obviously panic bars or other means to open them easily (no locked exits)
in the direction of travel
-no exit into areas of higher risk
-emergency lighting if required
-illuminated exit signs
-not an exit for other doors
-clear access, etc.
Much of this is life safety code issues which you can obtain from the NFPA
Zack
S.Z. Mansdorf, Ph.D., CIH, CSP, QEP
-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of
Merlin
Sent: Tuesday, August 20, 2013 9:40 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Query on Evacuation routes & floor plans
Dear DCHAS members,
I am inquiring about specifications concerning posting of Evacuation Routes
and corresponding floor plans.
Do such qualifications (from OSHA) exist? I tend to think that these may
exist.
Thank you in advance.
-George
***************************************
George D. McCallion
Chemist/Environmental Health & Safety
3250-B, St. Peters Rd.
St. Peters, PA 19470-0387
Office: 610.469.6543, ext. 104
Fax: 610.469.6547
Email: GMcCallion**At_Symbol_Here**Storedenergyconcepts.com
***************************************
Previous post | Top of Page | Next post