From: Janet Baum <baum.janet**At_Symbol_Here**GMAIL.COM>
Subject: Re: [DCHAS-L] Mounting Fire Extinguishers on Walls
Date: Tue, 6 Aug 2013 10:45:27 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAAgNRJjm_diRHZ39VwrXBOjpi0wMwYpYA=Cc9k47a3OAJ4SWYg**At_Symbol_Here**mail.gmail.com
In-Reply-To


Dear Bob, Here is the reference on fire extinguisher regs from Guidelines for Laboratory Design: Health, Safety, and Environmental Considerations, 4th ed. page 54. "All fire extinguishers must be sized and installed in accordance with NFPA 10 (2010), 'Portable Fire Extinguishers'."
Janet Baum, AIA
co-author of GLD 4th ed.


On Tue, Aug 6, 2013 at 10:04 AM, Erik A. Talley <ert2002**At_Symbol_Here**med.cornell.edu> wrote:
Posting a question for Bob Alaimo (rjalaimo**At_Symbol_Here**yahoo.com<mailto:rjalaimo**At_Symbol_Here**yahoo.com>):


Is anyone aware of specific regulatory guidance for the mounting of fire extinguishers on the walls of chemical storerooms or laboratories? Such as height from floor and marking the area around the extinguisher with a red border or a indicating sign?

Thanks,

Bob Alaimo

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.