From: Raymond Ng <drrayng**At_Symbol_Here**GMAIL.COM>
Subject: Re: [DCHAS-L] Butyl Lithium & syringe safety
Date: March 7, 2013 2:16:39 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <CAA4EBLtk1T8Dp=FGoE9QpNp67DjzTj2eyKjrnBHYuH7TQ0DGHA**At_Symbol_Here**mail.gmail.com>


1) Residual organometallics in the syringe can react with moisture in the air and cause a fire. Residual reagent can be carefully rinsed out with heptane and quenched carefully with methanol.
2) Yes, keeping a sharps container in the hood is a good idea just in case a fire starts in the sharps container.
3) Syringes should be disposed of in a sharps container.
Considering the lab accident involving t-butyllithium and plastic syringes, I recommend using gas-tight glass/teflon syringes with luer lock. There is less chance of accidentally pulling the plunger out of the syringe during filling when using a gas-tight.
Ray Ng
Site Safety Officer
CoMentis

On Thu, Mar 7, 2013 at 8:52 AM, Kim Gates <kim.gates**At_Symbol_Here**stonybrook.edu> wrote:
I have a question from our Chem dept about nButyl Lithium & syringes after I forwarded them the CEN blog on safer syringes. http://cenblog.org/the-safety-zone/2013/02/engineering-safer-syringes/

The lab's SOP calls for not reusing their syringes & only filling them 50%. I asked them to write in more clearly that they are to dispose in sharps container.

The questions I'm hoping any of you with similar hazards can help with:

1. Is there enough residual material in the syringe that it could be hazardous?
2. Should there be a sharps container stored in the fume hood for the exclusive use of these syringes (avoiding incompatible material that may be left in the syringe)
3. If not a sharps container, what/how does your labs dispose of these syringes?

thanks!



Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
Kim.Gates**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

Please note my name and email have changed.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.