From: "Kennedy, Sheila" <s1kennedy**At_Symbol_Here**UCSD.EDU>
Subject: Re: [DCHAS-L] Butyl Lithium & syringe safety
Date: March 7, 2013 1:04:41 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <1106498625.207968.1362675848803.JavaMail.root**At_Symbol_Here**sz0004a.emeryville.ca.mail.comcast.net>


The cannula transfer technique is beautifully demonstrated in these videos:

http://chem-courses.ucsd.edu/CoursePages/Uglabs/143A_Weizman/EHS/EHS.html

 

Sheila

_________________________________

Sheila Kennedy, C.H.O.

Safety Coordinator | Teaching Laboratories

UCSD Chemistry & Biochemistry |MC 0303

s1kennedy**At_Symbol_Here**ucsd.edu | http://www-chem.ucsd.edu

Office: (858) 534-0221 | Fax: (858) 534-7687
_________________________________

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU]On Behalf Of George D. McCallion
Sent: Thursday, March 07, 2013 9:04 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Butyl Lithium & syringe safety

 

I would like to add that the technique of using syringes in handling pyrophorics is highly ill-advised.

 

I metioned this in one of my posts a few years go on this topic.

 

Use a double-tipped cannula and transfer under Argon or Nitrogen for the source bottle. The amount of materials transferred can be determined by the loss in weight.

 

I just don't want to read about another syringe-based accident.

 

PLEASE BE CAREFUL!

 

-george


From:"Kim Gates" <kim.gates**At_Symbol_Here**STONYBROOK.EDU>
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Sent: Thursday, March 7, 2013 9:52:50 AM
Subject: [DCHAS-L] Butyl Lithium & syringe safety

I have a question from our Chem dept about nButyl Lithium & syringes after I forwarded them the CEN blog on safer syringes.http://cenblog.org/the-safety-zone/2013/02/engineering-safer-syringes/
  

 

The lab's SOP calls for not reusing their syringes & only filling them 50%. I asked them to write in more clearly that they are to dispose in sharps container. 

 

The questions I'm hoping any of you with similar hazards can help with:

 

1. Is there enough residual material in the syringe that it could be hazardous?

2. Should there be a sharps container stored in the fume hood for the exclusive use of these syringes (avoiding incompatible material that may be left in the syringe)

3. If not a sharps container, what/how does your labs dispose of these syringes? 

 

thanks!

 

 


Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
Kim.Gates**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

Please note my name and email have changed.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.