From: "Robin M. Izzo" <rmizzo**At_Symbol_Here**PRINCETON.EDU>
Subject: Re: [DCHAS-L] extra small flame retardant lab coats
Date: January 10, 2013 10:05:33 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <C3795F5505D64F4494546EA7400C27D72E9A97FF**At_Symbol_Here**CHIMBX1.ad.uillinois.edu>

Peter,

Try Cintas. Jon Zibell is our contact:

zibellj**At_Symbol_Here**cintas.com or 203-910-7648


Robin M. Izzo, M.S.
Associate Director, EHS
Princeton University
609-258-6259 (office)

Get your facts first, then you can distort them as you please.
~ Mark Twain


-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ashbrook, Peter C
Sent: Thursday, January 10, 2013 9:26 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] extra small flame retardant lab coats

All:

One of our faculty has had difficulty finding extra small flame retardant lab coats commercially available. Can anyone point us to a good source or advise on how we can have ours tailored to fit students of this size?

Thanks.

Peter

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.