From: "Brian T. Mars" <bmars**At_Symbol_Here**CARLETON.EDU>
Subject: [DCHAS-L] labels
Date: December 13, 2012 12:17:21 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <477416075.89744897.1355419041692.JavaMail.root**At_Symbol_Here**carleton.edu>

How does everyone make temporary labels for solutions that go to lab? A generation ago I programmed an Apple IIe to make labels with a dot matrix printer. They worked great but eventually the computer people stopped supporting that hardware. Now I use a PC with a Dymo Labelwriter Turbo. These labels are on thermal print stock and don't do well when solvents or acids dribble on them. I'm hoping some of you have a better method.

-Brian

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.