From: "Secretary, ACS Division of Chemical Health and Safety" <secretary**At_Symbol_Here**DCHAS.ORG>
Subject: Re: [DCHAS-L] Chemical Safety headlines from Google (20 articles)
Date: October 26, 2012 2:03:55 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <0755BD35-A6C2-41D0-AC3B-213F3C822447**At_Symbol_Here**DCHAS.ORG>

From: Richard Swanson
Subject: RE: [DCHAS-L] Chemical Safety headlines from Google (20 articles)
Date: October 26, 2012 1:19:26 PM EDT

Sodium hydroxide, a cleaning ACID???? (See mustard plant accident below...)

They probably meant "cleaning agent", but they should still correct their inconsistency for the record. Sodium Hydroxide is a strong base, not an
acid. I know that either NaOH or KOH are primary ingredients in typical cleaning agents for certain metals. The NaOH solution will remove grease and
oils and dirt and some oxides prior to pretreatment and coating applications of containers or whatever. On the other hand, acids (e.g., H2SO4) can also
be used sometimes in a pickling stage that is sometimes further downstream in the same process to remove some of the heavier metal oxides in order to
obtain the ultimate in a clean surface capable of being plated.

Richard Swanson
TheChem

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.