About This Archive  | DCHAS-L 2012 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Re: [DCHAS-L] working with nanomaterial
Date: October 2, 2012 9:53:09 AM EDT
Author: Renzo Dalla Via 		Next by Date:
Subject: Re: [DCHAS-L] working with nanomaterial
Date: October 2, 2012 10:38:01 AM EDT
Author: "Robin M. Izzo"

From: Smah Abdelhamid <sabdelhamid**At_Symbol_Here**STUDENT.CLAYTON.EDU>
Subject: Re: [DCHAS-L] working with nanomaterial
Date: October 2, 2012 10:13:20 AM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <4CB9A51AE5B8C44BA13375C794CBA29A8DA6D7E222**At_Symbol_Here**UMAOITEXMB.oit.ads.umass.edu>

How much are you trying to weigh and what is the material you trying to weigh, nano material is too broad.

Sincerely Yours,

On Oct 2, 2012, at 9:52 AM, "Yung Morgan" > wrote:

Dear members,

Does anyone have a source on a containment system for safely weighing dry nanomaterial? A chemical hood is usually too turbulent for the accuracy of a Mettler balance. Any thought you have including precaution(s) to take for this type of work would be appreciated.

Thank you and keep up the great work you do.

Yung Morgan, MsPH
Laboratory Safety
Industrial Hygiene Services
Environmental Health and Safety
117 Draper hall
UMASS,Amherst MA 01003
phone (413) 545-2682
Fax (413) 545-2600
email : pmorgan**At_Symbol_Here**ehs.umass.edu

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.