| About This Archive | | DCHAS-L 2012 Index | | DCHAS-L Yearly Index | |
Check out Safety Emporium for your N95, N99, and face shield needs.
|
Previous by Date: Subject: Re: [DCHAS-L] Toxic dust handling Date: June 27, 2012 10:27:41 AM EDT Author: Ken Kretchman |
Next by Date: Subject: Re: [DCHAS-L] High performance hoods Date: June 27, 2012 10:47:28 AM EDT Author: Ralph B Stuart |
Does anyone have experience with such hoods and have they found them to be acceptable for use with common solvents. Are there any downsides to their use?
I have seen demonstrations of them that indicate that they work as well as more traditional hoods in terms of containment. Aerodynamically, there's nothing particularly magic about 100 fpm, so I believe that a well designed hood should be able to provide the same protection at 80 fpm and don't forsee any operational downsides. Some jurisdictions have regulators who need to be convinced of this, though.
Maybe someone with more direct experience of the lower flow hoods knows of other challenges they present?
- Ralph
Ralph Stuart CIH
Laboratory Ventilation Specialist
Department of Environmental Health and Safety
Cornell University
rstuart**At_Symbol_Here**cornell.edu
Previous post | Top of Page | Next post