From: "Dube, Mike (JUS)" <Mike.J.Dube**At_Symbol_Here**ONTARIO.CA>
Subject: Re: [DCHAS-L] Radon Removal
Date: May 17, 2012 2:48:35 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <DB902496-C270-4F7C-8EC3-7CE9A9026A74**At_Symbol_Here**ilpi.com>


Radon gas is a common problem in homes built anywhere on the Canadian Shield; blasting granite to put in a home foundation faces this issue as well. Our solution – install a ventilation fan in the foundation wall, drawing air out of the closed space. This ventilation flow reduces the problem to negligible amounts. For your lab room – increase ventilation flows by adjusting HVAC damper settings; or install a ventilation fan to the outside and pressurize the room with fresh air, blowing out into the lab, where building HVAC will remove it. A simple small furnace filter on the fresh air fan will take care of outdoor particulates. This process is minimally invasive.

 

Michael J. Dube
Program Specialist

Emergency Preparedness and Response Unit (EPRU)

Office of the Fire Marshal of Ontario (OFM)
Ministry of Community Safety and Correctional Services (MCSCS)
Office: (705)687-9696
Cell: (705) 715-4768
Pager: (705) 735-5935
Fax: (705) 687-8636


From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of ILPI
Sent: May 17, 2012 1:15 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Radon Removal

 

Presumably, the radon is coming from the soil beneath the building in which case the usual remediation method is sub-slab depressurization.  Basically, you drill a 4" hole through the slab into the soil beneath, run a plastic pipe up to the roof where an exhaust fan sucks out the radon-contaminated atmosphere beneath the slab.  This stops the radon before it can enter the building itself.  Google the term "sub-slab depressurization" and you'll get lots of drawings, diagrams and descriptions.

 

Any competent radon remediation expert (guess the Yellow Pages are still useful!) can handle this.  For a home, it might run $1,000 or so, installed.

 

Rob Toreki

 

  ======================================================

Safety Emporium - Lab & Safety Supplies featuring brand names

you know and trust.  Visit us at http://www.SafetyEmporium.com

esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412

Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

 

On May 17, 2012, at 9:31 AM, Butler, David H. wrote:



Good Morning,

 

We have a small room in our laboratory where radon gas buildup is an issue that interferes with our alpha detection equipment.

 

Anyone know of air filtration devices or any other solution that might help us eliminate this problem?

 

Thanks for your time and help.

 

David H. Butler

Lab Quality/Safety Mgr., MBA, CSSBB, CMQ/OE, CHO

9/80 Group A

 

 


This message is intended only for the individual or entity to which it is addressed and contains information that is proprietary to Nuclear Fuel Services, Inc., a subsidiary of The Babcock & Wilcox Company, and/or its affiliates, or may be otherwise confidential. If the reader of this message is not the intended recipient, or the employee agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by return e-mail and delete this message from your computer. Thank you.

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.