From: "CHANDRA, Tilak" <tchandra**At_Symbol_Here**FPM.WISC.EDU>
Subject: [DCHAS-L] Addition to 40 micron aluminum powder:
Date: February 28, 2012 4:47:16 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <6F431C2EE2F38D459F5DD28C5B9A10BC0B9EB278**At_Symbol_Here**admin-fpm-exch1.fpm.wisc.edu>


Dear DCHAS members:

Addition to 40 micron aluminum powder:

One of PI in our campus is using 40 micron aluminum powder for the research purpose. After experiment/manipulations, aluminum dust is generated (fine layer of Al dust) in the enclosed room (the room is isolated area, precisely build for handling the manipulation, it is not common laboratory, also exhaust duct is equipped with appropriate filter and has explosion proof light fixture). I am only interested in cleaning procedure of the dust from the surfaces.

Thanks,

Tilak

Tilak Chandra, Ph.D.
Chemical Safety Specialist
Environment, Health and Safety
University of Wisconsin-Madison
30 East Campus Mall
Madison, WI 53715
Ph. 608-890-0255
FAX 608-262-6767
tchandra**At_Symbol_Here**fpm.wisc.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.