From: Eric Clark <erclark**At_Symbol_Here**PH.LACOUNTY.GOV>
Subject: Re: [DCHAS-L] Medical Waste
Date: February 23, 2012 3:17:21 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <390C703D90CE97409F79127132E33D342025B2A3D4**At_Symbol_Here**usto-pmsg-mbs05.am.corp.amgen.com>


Thanks Steve.  Not a bad idea.  A couple of other folks suggested that as well.  I'll put it in an SOP and run it by the director and see if that flies.  I'll let you know.  Then we'll see what happens on the next inspection.  Thanks, Eric

>>> On 2/23/2012 at 11:26 AM, in message <390C703D90CE97409F79127132E33D342025B2A3D4**At_Symbol_Here**usto-pmsg-mbs05.am.corp.amgen.com>, "Arvedson, Steve" <stephena**At_Symbol_Here**AMGEN.COM> wrote:

What about plastic cable ("zip") ties?  You could fold the bag over like you're doing, and secure it by wrapping the fold with one or more cable ties.

Steve

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Eric Clark
Sent: Thursday, February 23, 2012 11:12 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Medical Waste

 

Folks,

We had a medical waste inspection and nearly got by unscathed.  Seems the MW inspector wants us to put a granny knot in the top of the red MW bags.  The problem with a granny knot is that we lose a third of the bag volume, and liquid leaks out unless you pull it tight with the strength of Hercules.  We're a high throughput operation and as a MW LQG we take out lots of MW bags all day long. 

California Medical Waste Act says in Section 118280 (a) - Containment and Storage: "The bags shall be tied to prevent leakage or expulsion of contents during all future storage, handling, or transport." 

We gather the top, tightly twist, fold over, and secure with multiple wrappings of autoclave tape.  The MW inspector insists on a knot.  And we really don't want to do a hearing on this. 

Anybody have another suggestion?  Maybe something you've tried, like autoclave bag clips? Clamps? 

Maybe it's time to invent and market niche device. 

Eric

 

Eric Clark, MS, CCHO, CHMM

Safety & Compliance Officer

Los Angeles County Public Health Lab

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.