Yes more or less that is the same design.
In our version they included two hinged covers which are kept closed when the dissection is not in progress.
One of the challenges we are still working out is an efficient method to keep the cadaver's from drying out.
-Russ
Russell Vernon, Ph.D.
Director
Environmental Health & Safety
University of California, Riverside
900 University Ave
Riverside, CA 92521
russell.vernon**At_Symbol_Here**ucr.edu
Direct (951) 827-5119
Admin (951) 827-5528
Fax (951) 827-5122
http://www.ucop.edu/riskmgt/uctrips/
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU]On Behalf Of ACTSNYC**At_Symbol_Here**CS.COM
Sent: Thursday, February 02, 2012 2:02 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Cadaver lab ventilation; Dissection tables for 1) cadavers and ...
Russ, Is that the table in the ACGIH manual in figure VS-99-02?
In a message dated 2/2/2012 3:53:11 PM Eastern Standard Time, russell.vernon**At_Symbol_Here**UCR.EDU writes:
We recently remodeled our Gross Human Anatomy Lab with down-draft tables which are reducing the formaldehyde in the air dramatically. We followed the �side-slot' design that University of Nevada found most effective.
-Russ
Previous post | Top of Page | Next post