Didymium glasses are the norm, and a must, for glass working, and are available in prescription lenses. Chemical splash goggles can be worn over the didymium glasses when needed. Barry Ferm Chemical Hygiene Officer Biology & Chemistry Laboratory Coordinator St. Ambrose University (563) 333-6162 From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Secretary, ACS Division of Chemical Health and Safety Sent: Wednesday, December 21, 2011 9:27 AM To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU Subject: [DCHAS-L] Eye protection for working w/borosilicate glass From: phil_mckittrick**At_Symbol_Here**yahoo.com One of our labs uses sealed borosilicate glass tubes for some experiments. A tech seals several dozen of the tubes with a torch (I know he is using oxygen, I think the fuel is propane, I know it is not acetylene) at one time. He was complaining about the brightness of the light, so is now wearing safety sunglasses that block 99+% UV. Anyone have experience with something similar to this? I have seen the didymium glasses that hobbyists use for glass blowing, but I am not sure what eye protection to provide. He has tried welders goggles, but found them too dark. Thanks, Phil McKittrick Nalco Company
Previous post | Top of Page | Next post