Date: Sat, 15 Oct 2011 07:03:59 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sender: DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu>
From: James Stewart <jstewart**At_Symbol_Here**EHEINC.COM>
Subject: Re: FW: Welding Fumes
X-To: DCHAS-L
The most direct way to address the metals issue is to not only sample 
for the metals you know about but those that that you may not know about 
that may be present in small quantities in the rods or the substrate 
that could be released during welding. The easiest way is to ask the lab 
for a "welding fume metal profile". The lab analyzes for all the metals 
at once using ICP (NIOSH 7300) on each sample. The labs commonly report 
the 13 metals listed below (some labs offer 26 metals).


Aluminum (Al)
Antimony (Sb)
Beryllium (Be)
Cadmium (Cd)
Chromium (Cr)
Copper (Cu)
Cobalt (Co)
Iron (Fe)
Lead (Pb)
Manganese (Mn)
Molybdenum (Mo)
Nickel (Ni)
Titanium (Ti)
Vanadium (V)
Zinc (Zn)

Hope this helps.


Jim

James H. Stewart, Ph.D., C.I.H., CSP
Director, Advanced Analytics and Building Sciences Division
Principal Scientist
Environmental Health & Engineering, Inc.
117 Fourth Ave. Needham, MA 02494
(781) 247-4300 (Office)
(617) 594-4527 (cell)

________________________________

From: DCHAS-L Discussion List on behalf of Williams, Mark
Sent: Fri 10/14/2011 1:23 PM
To: DCHAS-L@MED.CORNELL.EDU
Subject: [DCHAS-L] FW: Welding Fumes


Actually I don't think these are the most serious issues. Chromium and 
Nickel fumes are carcinogenic, and possibly Iron as well. You should 
probably test for all the metals involved.



Mark Williams
Teledyne Energy Systems Inc.
38 Loveton Cr
Sparks MD 21152
410-472-7733
mark.williams@teledynees.com

________________________________


From: Laura Damon [mailto:ldamon@FVCC.EDU]
Sent: Wednesday, October 12, 2011 2:22 PM
Subject: Welding Fumes

I will be monitoring welding fumes in our student welding bay and am 
looking for suggestions of anything to look for other than particulates, 
carbon monoxide and carbon dioxide.

Thanks for any suggestions...

______________________________________________________________________
This e-mail has been scanned by MCI Managed Email Content Service, using 
Skeptic(tm) technology powered by MessageLabs. For more information on 
MCI's Managed Email Content Service, visit http://www.mci.com 
.
______________________________________________________________________

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.