Date: Tue, 11 Jan 2011 11:06:10 EST
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: ACTSNYC**At_Symbol_Here**CS.COM
Subject: Re: NY School

You are right on the mark.  Paint on boilers and furnaces was one of the uses listed by EPA in 1999.  And there's no reason to assume school boilers were any different. Monona

In a message dated 1/11/2011 5:40:42 AM Eastern Standard Time, p_sonnenfeld**At_Symbol_Here**HOTMAIL.COM writes:

While we're at it, there was an article published in the Spring or Summer in 1995 in the ACGIH Journal of Applied Occupational and Environmental Health citing the elevated levels of PCBs (in excess of 1%) in the high-temperature paint used on locomotives.  I'll speculate that similar paint was used on boilers and furnaces found in schools that were constructed prior to the 1960s.

Paul Sonnenfeld, CPEA

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.