I read many of the responses and think that the only thing that I can add is to check the Kodak web site. The Kodak site has information on the materials used in photographic labs and recommendations for their disposal. The site has contact information too.
From:
DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**list.uvm.edu] On Behalf Of
Wendy Campbell
Sent: Tuesday, December 21, 2010 11:15
AM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L]
Precipitate Sampling
Hey all,
I just ran into an
interesting situation. Some years ago, there was a plumbing leak
in a pipe tunnel. The "grey" water in the lines that
leaked out originated in a photography teaching lab and a metal arts
teaching lab. After the leak was fixed, the water was simply
allowed to dry in the tunnel and now there is a lot of dust left on the
floor. There will be a lot of work performed in the tunnels in the
next month or two, and this will certainly stir up the dust.
I know what processes are done there now, and I have a good idea
of "recent" history (the past 10 years or so), but I'm not
overly familiar with historical photography lab practices and the
photography manager is newer here than I am. Based on what I do
know, I grabbed a sample of the material and will have it tested to see
what might be in there and at what levels so we can start planning a
clean-up of the area. My question to the list is this: What
would you sample for? It would be awesome to have that mysterious
machine from CSI that can analyze molecules in seconds in the field, all
the way down to the brand of perfume and its retailers, but......
I'm thinking a TCLP for metals is in order, but is there anything else
that I should request of the lab doing the analysis?
Thanks,
Wendy
--
Wendy
Campbell, CSP
Occupational Health and Safety Officer
Environmental
Health and Safety
Boise State University
1910 University
Drive
Boise, Idaho 83725-1826
Office: (208) 426-3303
Fax:
(208) 426-3343
Previous post | Top of Page | Next post