Date: Fri, 3 Dec 2010 16:06:40 -0600
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Long, Don" <don.long**At_Symbol_Here**WGINT.COM>
Subject: Re: OHSA/NIOSH Permissible limits
In-Reply-To: A
OSHA has the legal standing.
 

Don A. Long
STS, CAIH
Southwest Research Institute Laboratory
Pine Bluff Chemical Agent Disposal Facility
PO Box 20130
White Hall, AR  71612
870-541-4930

-----Original Message-----
From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**LIST.UVM.EDU]On Behalf Of Jim Tung
Sent: Friday, December 03, 2010 3:23 PM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] OHSA/NIOSH Permissible limits

Hello, all:

When the NIOSH pocket guide has different permissible limits (NIOSH versus OSHA), which is the better one to follow?

For example, benzene's limit for NIOSH is 0.1 ppm (10 hr workday), while OSHA's limit is 1 ppm (8 hour workday.)

Why the difference? From a legal perspective, which is a better choice?

Thanks in advance for any advice you might give; obviously, any advice people might give is non-binding, you're not responsible, legal mumbo-jumbo, blah, blah.

Cheers, Jim Tung

Lead Hazardous Waste Coordinator
Obiter Research LLC
Champaign, IL

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.