Date: Mon, 25 Oct 2010 02:14:55 -0400
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Christopher Suznovich <snuz**At_Symbol_Here**MAC.COM>
Subject: Re: attaching tubing to glass
In-Reply-To: <684E8BFA09C42F43BA0A0D8772FD3BD805C85CBFAC**At_Symbol_Here**CTTR-EXCH-03.cormetech.com>
Depending on your application rubbing the glass with a water to slightly moisten it will help the tubing slide on.  Typically I’ve always found a thin layer of vacuum grease on the glass tubing then gently twist the tubing on works best.  The vacuum grease is inert in almost all cases and provides and airtight seal as well.

Chris



From: "House, Katherine C." <HouseKC**At_Symbol_Here**CORMETECH.COM>
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**list.uvm.edu>
Date: Fri, 22 Oct 2010 15:20:08 -0400
To: <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Subject: [DCHAS-L] attaching tubing to glass

A step in one of the analyses we do in our lab involves connecting Tygon tubing to the end of a glass tube.  We have Kevlar gloves for this purpose, but I’ve heard of an additional safety device that can also be used for this purpose—though I can’t find one.  I’ve done the obligatory Google search with no luck.  Has anyone heard of or used anything that reduces the risk of getting cut while attaching hose/tubing to glass tubes or rods?
Many thanks; I hope everyone has a great weekend!
 
Katherine C. House, CCHO
Laboratory Coordinator
Chemical Hygiene Officer
Cormetech, Inc.
5000 International Drive
Durham, NC 27712
919.620.3044 (office)
919.815.2024 (mobile)

This email and attachments, if any, contain confidential/proprietary information and is submitted without consideration other than the recipient's agreement that it shall not be reproduced, copied, lent, or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished.

P please consider the environment and print this e-mail only if absolutely necessary

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.