Date: Mon, 18 Oct 2010 10:58:37 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Jim Tung <jimtung**At_Symbol_Here**GMAIL.COM>
Subject: Re: Flame resistant PPE
In-Reply-To: <C595A967-7F43-4137-9856-777C6F24F2A5**At_Symbol_Here**ilpi.com>

Is Tychem(R) flame-resistant? On Sun, Oct 17, 2010 at 8:27 PM, ILPI wrote: > If you don't have Nomex be sure to wear cotton whenever you are in the > laboratory. Polyester or blends thereof fuse to the skin when they melt , > which can make burn injury and treatment far more complex. The Royal Nav y > learned that the hard way when the HMS Sheffield was struck by an Exocet > missile during the Falklands conflict, and have since changed to natural > fiber uniforms. > > And in case anyone was wondering, Tyvek=AE is not flame-resistant and is not > recommended for use around heat, flames, sparks, or flammable/explosive > environments. > > Rob Toreki > > ======================= ========================= ====== > Safety Emporium - Lab & Safety Supplies featuring brand names > you know and trust. Visit us at http://www.SafetyEmporium.com > esales**At_Symbol_Here**safetyemporium.com or toll-free: (866) 326-5412 > Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012 > > > On Oct 17, 2010, at 8:00 PM, Wawzyniecki Jr, Stefan wrote: > > We used to buy Nomex coveralls and coats when we poured off large > quantities of solvents- here is a site > > http://www.coverallsale.com/nomex-lab-coats.htm > > Use in labs may be cost prohibitive- these run $80.00- I doubt all lab s > would think it a necessary PPE for normal lab applications. > > -Stefan Wawzyniecki > University of Connecticut > ________________________________________ > From: DCHAS-L Discussion List [DCHAS-L**At_Symbol_Here**list.uvm.edu] On Behalf Of Ralph > Stuart [rstuart**At_Symbol_Here**UVM.EDU] > Sent: Sunday, October 17, 2010 11:41 AM > To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU > Subject: [DCHAS-L] Flame resistant PPE > > After reviewing a pyrophorics safety video, a chemistry faculty member ha d > this question: > > I think it would be good to provide people in our department with > information on which lab coats are most flame resistant and where to > purchase them. Do you guys have that information handy? > > > Various Google searches didn't produce anything particularly definitive i n > this regard. Does anyone know of a good source of information to answer t his > question with? > > Thanks for any help. > > - Ralph > > Ralph Stuart, CIH > Environmental Safety Manager > University of Vermont > Environmental Safety Facility > 667 Spear St. Burlington, VT 05405 > > rstuart**At_Symbol_Here**uvm.edu > > > >

Is Tychem(R) flame-resistant?

On Sun, Oc t 17, 2010 at 8:27 PM, ILPI <info**At_Symbol_Here**ilpi.com> wrote:
If you don't have Nomex be s ure to wear cotton whenever you are in the laboratory. =A0 Polyester or ble nds thereof fuse to the skin when they melt, which can make burn injury and treatment far more complex. =A0The Royal Navy learned that the hard way wh en the HMS Sheffield was struck by an Exocet missile during the Falklands c onflict, and have since changed to natural fiber uniforms.

And in case anyone was wondering, Tyvek=AE is not flame -resistant and is not recommended for use around heat, flames, sparks, or f lammable/explosive environments.

Rob Toreki

=A0=A0 ========================= ========================= ====
Safety Emporium - Lab & Safety Supplies featurin g brand names
you know and trust. =A0Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyempor ium.com =A0or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

< /div>

On Oct 17, 2010, at 8:00 PM, Wawzyniec ki Jr, Stefan wrote:

We used to buy Nomex coveralls and coats when we poured off large quantities of solvents- here is a site

http://www.coverallsale.com/nomex-lab-coats.htm

Use in labs may be cost prohibitive- =A0these run $80.00- =A0=A0I doubt all labs would think it a necessary PPE for normal lab applications.
-Stefan Wawzyniecki
University of Connecticut
_____________________ ___________________
From: DCHAS-L Discussion List [DCHAS-L**At_Symbol_Here**list.uvm.edu] On Behalf Of Ralph Stuart [rstuart**At_Symbol_Here**UVM.EDU]
Sent: Sunday, October 17, 2010 11:41 AM
To: DCHAS-L**At_Symbol_Here**LIST. UVM.EDU
Subject: [DCHAS-L] Flame resistant PPE

After reviewin g a pyrophorics safety video, a chemistry faculty member had this question:

I think it would be good to provide people in our department with information on which lab coats are most flame resistant an d where to purchase them. Do you guys have that information handy?

Various Google searches didn't produce anything particularly defini tive in this regard. Does anyone know of a good source of information to an swer this question with?

Thanks for any help.

- Ralph

Ralph Stuart, CIH
Environmental Safety Manager
University of Verm ont
Environmental Safety Facility
667 Spear St. Burlington, VT =A0054 05

rstuart**At_Symbol_Here**uvm. edu



< /div>

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.