Date: Fri, 27 Aug 2010 16:48:11 -0700
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Gordon Kroemer <gkroeme**At_Symbol_Here**LINFIELD.EDU>
Subject: Re: Hoods failing annual calibration
In-Reply-To: <6AD6E0EF87C9E14E97A1A3DB9181A3B33ECFA41E**At_Symbol_Here**usvfmbx02>
We call our Facilities Department.  The HVAC people make the proper a djustments and we retest.  That is for all except one (a special one). For that, we call the factory approved repairman.

Gordon J. Kroemer, CSP, NRCC-CHO
Director, Office of EHS
Linfield College
900 SE Baker Street, A508
McMinnville, OR 97128
503-883-2431
503-883-2204 fax

On 26/08/10 12:42, "Peifer, Patricia" <Patricia.Peifer**At_Symbol_Here**WESTPHARMA.COM> wrote:

< SPAN STYLE='font-size:11pt'>I work in a GMP laboratory in the medical device industry.  A member of our metrology team questioned me today as to wh at we would do in event one of our chemical fume hoods did not meet one or m ore of its annual qualification events, for example if the hood did not meet its face velocity requirement during the annual test.  We do have moni tors on our hoods, but occasionally they have been found to be faulty.
 
According to our work instructions, any “instrument” which does not meet any of its qualification events must have an impact assessment don e.  Usually this relates to the impact the failure may have had on the results of tests that were done using the instrument.  But in this case we would be talking about a safety impact assessment rather than focusing o n the results of tests.  The metrology member also mentioned to me that we should, according to our work instruction, have a usage log for each hoo d so that a proper impact assessment could be done.  
 
My thoughts are this:
I would not call a chemical fume hood an “instrument” and there fore would not consider it subject to the previously mentioned work instruct ion
I have never heard of any facility having a usage logbook for chemical fume hoods
 
BUT… the question I really want to ask the group is this:  in th e event a hood fails any of its annual calibration events, what do you do? & nbsp; Do you speak to people who have been using the hood, prepare an i mpact assessment, etc.?
 
Thanks,
Pat Peifer
Health, Safety and Training Team Leader

The contents of this message are con fidential and may be privileged. If you have received this message in error, please permanently delete it, along with any files that may be attached to this message, without reading, printing, copying, forwarding or otherwise di stributing it. Please notify the sender of the error immediately so that we can prevent it from happening again.


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.