Date: Wed, 25 Nov 2009 12:31:11 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Ernest Lippert <ernielippert**At_Symbol_Here**TOAST.NET>
Subject: Eye Protection in Analytical Labs

I would like to receive comments, information about current practices, and legal implications regarding eye protection in industrial analytical/RD laboratories. Obviously, OSHA 1910.133(a)(1) applies but no direction is given. Safety, comfort, and compliance are paramount. The lab personnel are trained chemists and would handle many different chemicals including both concentrated and dilute acids, bases, and other materials common to analytical techniques. The acids would include hydrofluoric and perchloric. No pyrophoric or extremely toxic materials like methyl mercury are involved. Bench top and hood operations are to be considered. There are many combination of PPE but I think the following 4 include the important possibilities: (1) safety glasses with side shields, (2) safety glasses with side shields and full face protection, (3) fitted goggles with indirect vents, and (4) fitted goggles without vents. Regards, Ernie Lippert

I would like to receive comments, information about cu rrent practices, and legal implications regarding eye protection in industr ial analytical/RD laboratories. Obviously, OSHA 1910.133(a)(1) applies but no direction is given. Safety, comfort, and compliance are paramount. The l ab personnel are trained chemists and would handle many different chemicals including both concentrated and dilute acids, bases, and other materials c ommon to analytical techniques. The acids would include hydrofluoric and pe rchloric. No pyrophoric or extremely toxic materials like methyl mercury ar e involved. Bench top and hood operations are to be considered.

=A0

There are many combination of PPE but I think the foll owing 4 include the important possibilities: (1) safety glasses with side s hields, (2) safety glasses with side shields and full face protection, (3) fitted goggles with indirect vents, and (4) fitted goggles without vents.

=A0

Regards,

Ernie Lippert

=A0

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.