Date: Thu, 12 Nov 2009 11:11:37 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: rudygerlach**At_Symbol_Here**AOL.COM
Subject: Re: Setting Up Spill Kits...
In-Reply-To: <safbd67a.024**At_Symbol_Here**gwsmtp.doli.state.mn.us>

----------MB_8CC31C9F24C709E_2340_1CA77_webmail-d038.sysops.aol.com

 Vermiculite will control the liquid solvent but it still releases the vap
ors.( fires, toxic).  With vermiculite you will be moving a haz. material
 from one location to another.  Solusorb controls the vapors so that the
 flash point is raised to make the solvent  no longer a flammable, and the
refore, it   is no longer a hazardous material.  This is safer and reduces
 the costs of disposal.

 

 

-----Original Message-----
From: Diane Amell 
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Sent: Thu, Nov 12, 2009 10:33 am
Subject: Re: [DCHAS-L] Setting Up Spill Kits...







I must be missing something. After the W R Grace mess in Libby, MT and
NE Minneapolis, vendors are still shipping product in vermiculite? I
would think the potential liability from asbestos exposure would cause
them to use something else. (And trust me, there's plenty of attorneys
operating in this state that are on late night TV touting asbestos
liability lawsuits.)

- Diane Amell, MNOSHA

>>> sigmannsb**At_Symbol_Here**APPSTATE.EDU 11/11/2009 9:46 PM >>>
We save all our vermiculite that chemicals are packed in.  I like to 
include a box of the this in the spill kits.  It is good for organic 
solvents and it's free!
Sammye

Margaret Rakas wrote:
> Hi,
>
> We're setting up a new 'wet' science building and while we have
'spill kits' here, I would like to find out what others find useful to
keep on hand and deal with:
>
> 1) Small (1 gallon or less) solvent spills --acetone, ethanol, the
like
>
> 2) Acid/base spills
>
> I am particularly interested whether you have chosen to go with the
'universal' sorbent pads OR instead use a powder that (at least in the
case of acid/base spills) neutralizes.  I can see the benefit from a
powder for flammable spills--there isn't the issue of packaging a
solvent-soaked combustible pad for safety, until the next lab pack--but
I would think that using a neutralizing agent pretty much means the
vapors are going to lead you into respirator use.  
>
> Any products or methods you've loved, please let me know!
> Many thanks,
> Margaret
>
>
> Margaret A. Rakas, Ph.D.
> Manager, Inventory & Regulatory Affairs
> Clark Science Center
> Smith College
> Northampton, MA. 01063
> p:  413-585-3877
> f:   413-585-3786 
>   


 

----------MB_8CC31C9F24C709E_2340_1CA77_webmail-d038.sysops.aol.com

Vermicu lite will control the liquid solvent but it still releases the vapors.( fi res, toxic).  With vermiculite you will be moving a haz. material fro m one location to another.  Solusorb controls the vapors so that the flash point is raised to make the solvent  no longer a flammable, an d therefore, it   is no longer a hazardous material.  This is sa fer and reduces the costs of disposal.


-----Original Message-----
From: Diane Amell <Diane.Amell**At_Symbol_Here**STATE.MN.US>
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Sent: Thu, Nov 12, 2009 10:33 am
Subject: Re: [DCHAS-L] Setting Up Spill Kits...

I must be missing something. After the
 W R Grace mess in Libby, MT and
NE Minneapolis, vendors are still shipping product in vermiculite? I
would think the potential liability from asbestos exposure would cause
them to use something else. (And trust me, there's plenty of attorneys
operating in this state that are on late night TV touting asbestos
liability lawsuits.)

- Diane Amell, MNOSHA

>>> sigmannsb**At_Symbol_Here**APPSTATE. EDU 11/11/2009 9:46 PM >>>
We save all our vermiculite that chemicals are packed in. I like to
include a box of the this in the spill kits. It is good for organic
solvents and it's free!
Sammye

Margaret Rakas wrote:
> Hi,
>
> We're setting up a new 'wet' science building and while we have
'spill kits' here, I would like to find out what others find useful to
keep on hand and deal with:
>
> 1) Small (1 gallon or less) solvent spills --acetone, ethanol, the
like
>
> 2) Acid/base spills
>
> I am particularly interested whether you have chosen to go with the 'universal' sorbent pads OR instead use a powder that (at least in the
case of acid/base spills) neutralizes. I can see the benefit from a
powder for flammable spills--there isn't the issue of packaging a
solvent-soaked combustible pad for safety, until the next lab pack--but
I would think that using a neutralizing agent pretty much means the
vapors are going to lead you into respirator use.
>
> Any products or methods you've loved, please let me know!
> Many thanks,
> Margaret
>
>
> Margaret A. Rakas, Ph.D.
> Manager, Inventory & Regulatory Affairs
> Clark Science Center
> Smith College
> Northampton, MA. 01063
> p: 413-585-3877
> f: 413-585-3786
>

----------MB_8CC31C9F24C709E_2340_1CA77_webmail-d038.sysops.aol.com--

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.