Have you tried Kevlar gloves when doing this? Or perhaps Neoprene over Kevlar for some added grip.
Shannon Crutchfield
Chemist / Safety Coordinator
Cincinnati, OH 45237
From: DCHAS-L
Discussion List [mailto:DCHAS-L**At_Symbol_Here**list.uvm.edu]
On Behalf Of Jeskie, Kimberly B.
Sent: Tuesday, November 10, 2009 12:17 PM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] Tool selection for removing hoses from glassware
We’ve been looking hard at our hand injuries l ately and are focusing on cutting tool and glove selection. One thing in particular that we haven’t been able to come up with a good solut ion for is a tool that works well for removing tubing that has basically seized or “become one with” the glass conne ctions on condensers, cold fingers, etc. I’m sure you’ve seen this before and most people reach for their pocket knife or a razor bl ade. It generally ends badly. Either the blade slips or the glass breaks and in either situation we end up with stitches. Anyone found a tool that works better under these conditions?
Kim
Kimberly Begley Jeskie, MPH-OSHM
Operations Manager
Physical Sciences Directorate
Oak Ridge National Laboratory
(865) 574-4945
Previous post | Top of Page | Next post