Date: Tue, 10 Nov 2009 13:08:52 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: ILPI <info**At_Symbol_Here**ILPI.COM>
Subject: Re: Tool selection for removing hoses from glassware
In-Reply-To: <34704B7D15D2C14BA7F130CB44313E3F01DCE758251C**At_Symbol_Here**EXCHMB.ornl.gov>

The better solution is condensers that have removable hose connectors.   See, for example, http://www.safetye mporium.com/?CG-1213-A-HC-01 or look on http://www.safetyemporium.com/ILPI_Site/WebPagesUS/lab/condenser.htm for additional styles.

Disclaimer: I'm the owner of Safety Emporium.

Best wishes,

Rob Toreki

On Nov 10, 2009, at 12:16 PM, Jeskie, Kimberly B. wrote:

We=92ve been looking hard at our hand injuries lately and are focusing on cutting tool and glove selection.  One thing in particular that we haven=92t been able to come up with a good solution for is a tool that works well for removing tubing that has basically seized or =93become one with=94 the glass connections on condensers, cold fingers, etc.  I=92m sure you=92ve seen this before and most people reach for their pocket knife or a razor blade.  It generally ends badly.  Either the blade slips or the glass breaks and in either situation we end up with stitches.  Anyone found a tool that works better under these conditions?
Kim
Kimberly Begley Jeskie, MPH-OSHM
Operations Manager
Physical Sciences Directorate
Oak Ridge National Laboratory
(865) 574-4945


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.