Date: Wed, 28 Oct 2009 05:56:35 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Long, Don" <don.long**At_Symbol_Here**WGINT.COM>
Subject: Re: Storing Gas Cylinders Horizontally
Comments: To: neal**At_Symbol_Here**chemical-safety.com
In-Reply-To: A<01fd01ca5765$b5dbe140$2193a3c0$**At_Symbol_Here**com>

NFPA 55 should answer most questions about this. I'm sure there are plenty of CGA publications out there also.
 
I personally would not reccommend storing cylinders on their sides as, among other reasons, it would defeat one of the purposes of the pressure relief valve should an unexpected release occur. If you take a look at the caps on cylinders (those equipped with caps) you'll notice holes - those holes are spaced in such a fashion as to distribute the cylinder contents evenly in the event of a pressure release thus (hopefully) keeping the cylinder from performing rather interesting gyrations, damage and injuries.
 
Unless using cylinders that are specifically designed to be stored and even used while on their sides, I would defer to the experts (CGA, etc) who have told us that it's not a good idea for "normal" cylinders to be stored or used this way.
 

Don A. Long
STS, CAIH
Southwest Research Institute Laboratory
Pine Bluff Chemical Agent Disposal Facility
PO Box 20130
White Hall, AR  71612
870-541-4930

-----Original Message-----
From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**LIST.UVM.EDU]On Behalf Of NEAL LANGERMAN
Sent: Tuesday, October 27, 2009 7:29 PM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: Re: [DCHAS-L] Storing Gas Cylinders Horizontally

No reason – prevent from rolling; protect from impact.  Did this all the time at oil research centers

------------------------------------------- ---------------------------------------

The information contained in this message is privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.

NEAL LANGERMAN
ADVANCED CHEMICAL SAFETY, Inc.
7563 CONVOY Ct
SAN DIEGO CA 92111
(858) 874 5577 (phone, 24/7)
(858) 874 8239 (FAX)
www.chemical-safety.com

From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**list.uvm.edu] On Behalf Of Debbie M. Decker
Sent: Tuesday, October 27, 2009 3:13 PM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] Storing Gas Cylinders Horizontally

Excuse the cross-postings.

Besides not storing acetylene (and other fuel gases) horizontally, can you think of any reason why gas cylinders can’t be stored horizontally?

Thanks,

Debbie

--------------------

Debbie M. Decker, Campus Chemical Safety Officer
Environmental Health and Safety
University of California, Davis
1 Shields Ave.
Davis, CA  95616
(530)754-7964/(530)752-4527 (FAX)
dmdecker**At_Symbol_Here**ucdavis.edu
Co-Conspirator to Make the World A
Better Place -- Visit www.HeroicStories.com and join the conspiracy

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.