Date: Thu, 12 Mar 2009 15:45:28 -0400
Reply-To: "Dr. Jay A. Young" <chemsafety**At_Symbol_Here**VERIZON.NET>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Dr. Jay A. Young" <chemsafety**At_Symbol_Here**VERIZON.NET>
Subject: Re: Mercury cleanup by a contracted vendor
Comments: To: "Schmidt-Nebril, Kathleen"

Kathleen,

Get a lawyer as quick as you can.

Jay Young

PS: It may already be too late.  Get that attorney the day before yesterday.
****************************************
----- Original Message ----- 
From: "Schmidt-Nebril, Kathleen" 
To: 
Sent: Monday, March 09, 2009 11:18 PM
Subject: Re: [DCHAS-L] Mercury cleanup by a contracted vendor

Currently I am the Dominican University CHO and am looking for comments, 
advice and/or resources to address the a situation I found myself in today. 
Our Physical Plant had hired an abatement contractor to clear our an old 
science building lab that had a known asbestos and Hg problem.  When I 
arrived on the scene to pick up another item this contractor had their crew 
of 5-7 non English speaking workers tearing out cabinets, counters etc in 
the contaminated room with absolutely no ventilation and only 2 workers 
wearing respirators for Hg toxic vapors?  The room itself was sealed in 
plastic and about 80F so I just knew the Hg vapor reading would be sky high. 
They had the room sealed because they had to keep the asbetos dust in? The 
company had an available Luminox instrument to detect air conc. of Hg and I 
insisted they stop work and check the room.  Of course the reading was off 
the chart with the unit min allowed Hg conc being 1000( not sure of the 
unit) we read at 45000!  I made quite a fuss to the vendor about their 
worker's safety and insisted the room be ventilated and work stop until 
levels were within allowable range. At the same time other contracted 
vendors were showing up to do work in the room and I recommended they wait 
for safe levels. These were not vendors I had contracted but I definitely 
could tell they had a total disregard for their own crews safety and safety 
in general.  How liable are we for contracted vendors safety?  Can we be 
held responsible for their workers becoming ill from exposure since they are 
not our employees?  I was hoping someone out there can help me establish a 
strong case for safety to my employer with any website references or info 
you may have in these situations.

Thank You
Kathleen Schmidt-Nebril

-----Original Message-----
From: DCHAS-L Discussion List on behalf of Chrismarlowe
Sent: Sat 3/7/2009 7:58 AM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: Re: [DCHAS-L] Amorphous silicone dioxide silica

Paul:

WRT: "what do I say next time he wants to order in bulk!?"

Tell him, "Yes. The institution supports purchase in bulk as long as:

- The department will really use that much chemical long before it goes bad
and

- The department has the physical and procedural ability to manage the
material and its hazards."

Stay healthy,

Chris Marlowe
42 Highlander Dr
Scotch Plains, NJ  07076
908 / 754 - 5160 (home)
732 / 539 - 8128 (cell)
Krismarlowe**At_Symbol_Here**Verizon.net

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.