What manufacturer is that? Disclaimer: my company, Safety Emporium, is an Eagle Manufacturing distributor. All of Eagle Manufacturing's cabinets are equipped with replaceable fire baffles, which some folks call flash arrestors. The Vent Assemblies/Fire Baffles are easily removable with a screw driver. The cost to replace these versus the time/effort to try and clean seems reasonable. The 2008 list price on a C-90 Vent Assembly is $17.62. You can order those through Safety Emporium or any other Eagle distributor. Feel free to contact me off list if you require further information. Best regards, Rob Toreki >We have 45 gallon flammable storage cabinets with clogged flash >arrestors, so they're not exhausting properly (or at all in some >cases). >I spoke with the manufacturer who informed me that the arrestors are >not replaceable and should be cleaned with a mild detergent solution >every 6 months. >This has proven to be a challenge in the past because the cabinet >design makes the arrestors difficult to access and the recommended >detergent solution is not effective. >Has anyone experienced any similar situations or have any advice for >cleaning and maintaining the arrestors and/or cabinets? > >Thanks in advance, > >Denise > > > >Denise DuBois >Laboratory Safety Coordinator >Environmental Safety > >University of Vermont >McAuley Hall - Room 103 >250 Colchester Avenue >Burlington, VT 05401 >802-656-3321(phone) >ddubois1**At_Symbol_Here**uvm.edu(email) -- ===================================================== Safety Emporium - Lab & Safety Supplies featuring brand names you know and trust. Visit us at http://www.SafetyEmporium.com esales**At_Symbol_Here**safetyemporium.com or toll-free: (866) 326-5412 Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012
Previous post | Top of Page | Next post