Date: Mon, 8 Oct 2007 09:43:29 -0400
Reply-To: al.muehlhausen**At_Symbol_Here**CIBAVISION.COM
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: al.muehlhausen**At_Symbol_Here**CIBAVISION.COM
Subject: laboratory/office environmental control questions
I have been challenged by my engineering group to consider the following 
questions as they pertain to a mixed use office/laboratory building. Any 
input would be useful.

What is the target (set point) temperature, by space type.
What is the acceptable range of temperature, by space type.
What is the response time requirements of the temperature controlling 
system
What is the target (set point) humidity, by space type.
What is the acceptable range of humidity, by space type.
What is the response time requirements of the humidity controlling system
What is the minimum number of room air changes per hour, by space type.
What is the maximum number of room air changes per hour, by space type.
What are the pressure level requirements between / relative to each space 
type.
What is the response time requirements of the pressure controlling system.

Kind regards,

Al Muehlhausen
CIBA Vision Corporation
Chemist/Certified Industrial Hygienist
Health, Safety, and Environmental Officer JCE/JCA/BTI
Office 678-415-4217
Cell 678-644-7026

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.