Date: Sat, 4 Sep 2004 08:04:52 +0300
Reply-To: "Qureshi, Rasim M." <Rasimqureshi**At_Symbol_Here**UNITED.SABIC.COM>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Qureshi, Rasim M." <Rasimqureshi**At_Symbol_Here**UNITED.SABIC.COM>
Subject: Re: Certification of Hazards Analyses Used to Select PP E
Comments: To: Gordon Miller

We use our Risk Assessment technique for evaluation of hazards. It is part
of the procedure to evaluate the risk for each and every area and each and
every job

Rasim M Qureshi
Safety Engineer
United (SABIC)

-----Original Message-----
From: Gordon Miller [mailto:miller22**At_Symbol_Here**LLNL.GOV]
Sent: Wednesday, September 01, 2004 1:06 AM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] Certification of Hazards Analyses Used to Select PPE

How do you meet the requirement of 29 CFR 1910.132 (d)(2), "The
employer shall verify that the required workplace hazard assessment
(that guides the use and selection of PPE) has been performed through
a written certification that identifies the workplace evaluated; the
person certifying that the evaluation has been performed; the date(s)
of the hazard assessment; and, which identifies the document as a
certification of hazard assessment." (or its equivalent under state
OSHA regs)?

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.